WHAT YOU GET
Four stove dial/knob markings with numbers ranging from 0 through 6 with the zero positioned at 12 o'clock (AT THE TOP) and the numbers 1-6 positioned in an anticlockwise direction.
Please note these stickers are not calibrated or designed for any specific oven or stove. The buyer should check to ensure the sticker markings match those being replaced. Mismatched markings can be a safety hazard.
Please check the picture and your stove to ensure that these numbers match the rotational order of your stove.
These stickers are not suitable if your existing numbers start with the zero at 9 o'clock - The numbers will be set sideways and look odd . These are designed to apply to the stove surface - they are not suitable for sticking onto knob bezels - for worn bezel markings buy new bezels
Each transparent self adhesive sticker is sized with a 42mm inner diameter. *
Please ensure the inside diameter of 42mm is suitable - measure the diameter of your dials before ordering.
The outer diameter to the sticker's outer edge is 52mm (the circular strip of adhesive sticker is 5mm wide).
PLEASE NOTE - We have a few of these stickers clear with black print with a 45mm inner diameter and also some with a 37mm inner diameter - please email us email@example.com to order - price will be the same
In the above listing photos the edge of each sticker is outlined in magenta but this is only for illustrative purposes to show the inner and outer dimensions. The magenta coloured lines are not printed on the version you receive.
These stickers are designed to replace worn stove markings. They are reasonably hard wearing but whether they are as hard wearing as the original manufacturer's applied version - only time will tell - but so far so good.
They are made of heat resistant material and will withstand boiling water and will self extinguish if subjected to a flame test. The print is protected by a thin layer of transparent vinyl and as a consequence they are able to withstand normal cleaning with a cloth.
They are very easy to apply but before applying please ensure the oven surface is very clean and thoroughly dry before attempting to position the sticker. It will also help if all signs of the old markings are removed - be gentle when doing this so as to avoid scratching the stove surface
To apply simply peel the sticker from its paper backing (you might need to bend the backing slightly to allow the sticker to be peeled away) and apply to the stove's surface.
Once in position, rub the sticker to remove any air bubbles. The colour of the sticker design is either black which shows well on silver and light coloured backgrounds or white which shows well on dark surfaces such as black or green. Please select your colour preference accordingly.
Black print will not work with a black stove nor will white print on a white stove.
If you are not entirely satisfied please contact us within 30 days of receipt at firstname.lastname@example.org and we will liaise with you to ensure you receive the refund you are entitled to.